Moderators: William Anderson, letumgo
-
hankaye
- Posts: 6582
- Joined: Tue Jun 08, 2010 4:59 pm
- Location: Arrey, N.M. aka 32°52'37.63"N, 107°18'54.18"W
Post
by hankaye » Thu Jan 17, 2019 9:41 pm
Bazzer69, Howdy;
Bazzer69 wrote: ↑Thu Jan 17, 2019 9:34 pm
ronr wrote: ↑Thu Jan 17, 2019 8:08 am
Doug... do you use a dubbing rake when trying to remove just a small amount of dubbing from a hide or do you just clip it off with scissors....if using a rake.. what brand?
The best dubbin rake was a ceramic one that came from Lawrence Waldron, I had one but my ex wife took care of it. I’ve never seen it again. I would love to buy another but I’ve looked and looked and haven’t been able to find one. Some people use a small section of hacksaw blade, I haven’t tried it but it probably works.
Apparently they do show up every once in awhile.
https://www.ebay.co.uk/itm/132657884905?rmvSB=true
hank
Striving for a less complicated life since 1949...
"Every day I beat my own previous record for number
of consecutive days I've stayed alive." George Carlin
-
letumgo
- Site Admin
- Posts: 13346
- Joined: Sat Feb 21, 2009 7:55 pm
- Location: Buffalo, New York
-
Contact:
Post
by letumgo » Thu Jan 17, 2019 11:02 pm
Doug - I did not fix the pics. John must’ve fixed them. (Thanks John)
-
daringduffer
- Posts: 2195
- Joined: Sun Feb 22, 2009 5:11 am
Post
by daringduffer » Fri Jan 18, 2019 6:45 am
DOUGSDEN wrote: ↑Thu Jan 17, 2019 9:12 pm
A lot of beauty can be had when you ...(do it)... just right!
Dougsden
I faked your reply a bit. You are too modest. We have seen quite a few of your flies. In Sweden we have a saying "att sätta sitt ljus under en skäppa". You are a perfect example of what that means.
dd
-
tie2fish
- Posts: 5072
- Joined: Sun Feb 22, 2009 9:11 am
- Location: Harford County, MD
Post
by tie2fish » Fri Jan 18, 2019 6:53 am
daringduffer wrote: ↑Fri Jan 18, 2019 6:45 am
DOUGSDEN wrote: ↑Thu Jan 17, 2019 9:12 pm
A lot of beauty can be had when you ...(do it)... just right!
Dougsden
I faked your reply a bit. You are too modest. We have seen quite a few of your flies. In Sweden we have a saying "att sätta sitt ljus under en skäppa". You are a perfect example of what that means.
dd
I have asked Doug frequently to not hide his candle, but he persists.
Some of the same morons who throw their trash around in National parks also vote. That alone would explain the state of American politics. ~ John Gierach, "Still Life with Brook Trout"
-
Bazzer69
- Posts: 466
- Joined: Mon Dec 26, 2016 12:49 pm
- Location: Redding California
Post
by Bazzer69 » Fri Jan 18, 2019 2:13 pm
hankaye wrote: ↑Thu Jan 17, 2019 9:41 pm
Bazzer69, Howdy;
Bazzer69 wrote: ↑Thu Jan 17, 2019 9:34 pm
ronr wrote: ↑Thu Jan 17, 2019 8:08 am
Doug... do you use a dubbing rake when trying to remove just a small amount of dubbing from a hide or do you just clip it off with scissors....if using a rake.. what brand?
The best dubbin rake was a ceramic one that came from Lawrence Waldron, I had one but my ex wife took care of it. I’ve never seen it again. I would love to buy another but I’ve looked and looked and haven’t been able to find one. Some people use a small section of hacksaw blade, I haven’t tried it but it probably works.
Apparently they do show up every once in awhile.
https://www.ebay.co.uk/itm/132657884905?rmvSB=true
hank
Oh my! It’s up to £71, say $100 ! I can’t believe it. I bought the one my ex destroyed for around $25.
Love both fly fishing and fly tying, been doing it for a while
But not much good at either
-
ronr
- Posts: 873
- Joined: Fri Feb 12, 2016 12:03 pm
- Location: Central Oregon/Texas Transplant
Post
by ronr » Fri Jan 18, 2019 11:20 pm
Yep... for a $100 bucks, I'll just hack it off with scissors, or I may try the hacksaw blade...if a good one cost a hundred.. what good can a $3 one be....
I do have some patches of various furs I bought at a grab bag at an IFF show... there is some mink, beaver, otter, and other furs I can't identify...some appear to have been cut off of some form of clothing, such as an old mink stole...
I've been experimenting with my coffee grinder and mixing small batches with materials like sparkle yarn, ala, Gary LaFontaine. I'm sure the otter, beaver, and mink underfurs make good dubbing, but other than hare's mask, squirrel, and rabbit... what other furs should I be thinking of using. and what materials should I be blending in...
-
tie2fish
- Posts: 5072
- Joined: Sun Feb 22, 2009 9:11 am
- Location: Harford County, MD
Post
by tie2fish » Sat Jan 19, 2019 7:02 am
ronr wrote: ↑Fri Jan 18, 2019 11:20 pm
I've been experimenting with my coffee grinder and mixing small batches with materials like sparkle yarn, ala, Gary LaFontaine. I'm sure the otter, beaver, and mink underfurs make good dubbing, but other than hare's mask, squirrel, and rabbit... what other furs should I be thinking of using. and what materials should I be blending in...
Many of the tiers I know use red fox fur quite a bit ... mostly the light, creamy stuff. Australian possum is handy too, while others often use pine squirrel.
Some of the same morons who throw their trash around in National parks also vote. That alone would explain the state of American politics. ~ John Gierach, "Still Life with Brook Trout"
-
daringduffer
- Posts: 2195
- Joined: Sun Feb 22, 2009 5:11 am
Post
by daringduffer » Sat Jan 19, 2019 8:51 am
tie2fish wrote: ↑Sat Jan 19, 2019 7:02 am
ronr wrote: ↑Fri Jan 18, 2019 11:20 pm
I've been experimenting with my coffee grinder and mixing small batches with materials like sparkle yarn, ala, Gary LaFontaine. I'm sure the otter, beaver, and mink underfurs make good dubbing, but other than hare's mask, squirrel, and rabbit... what other furs should I be thinking of using. and what materials should I be blending in...
Many of the tiers I know use red fox fur quite a bit ... mostly the light, creamy stuff. Australian possum is handy too, while others often use pine squirrel.
Australian possum underfur is extremely useful as binder in a dubbing blend. You can also find shades that can sub the lemon spaniel in your tup's dubbing mix.
dd
