Dorber 10 foot 4 wgt rods

Moderators: William Anderson, letumgo

User avatar
Ron Eagle Elk
Posts: 2818
Joined: Sun Feb 22, 2009 12:33 am
Location: Carmel, Maine

Dorber 10 foot 4 wgt rods

Post by Ron Eagle Elk » Tue Mar 10, 2009 1:42 pm

On another thread there was some discussion about using long rods and short line for fishing spiders (ala Mike Conner). I called Global Dorber about the price of a finished 10 footer. The 4 weight, including tube and sock is $135, finished. I imagine the other weights would about the same. The blank is about $66 if you want to build one yourself. The finished long rods aren't a normally stocked item, so the rod will be built for you. I ordered mine today.

Global Dorber's number is 1-888-483-2780.

Now to find some polypro mason's line.

REE
"A man may smile and bid you hale yet curse you to the devil, but when a good dog wags his tail he is always on the level"
User avatar
skunkaroo
Posts: 388
Joined: Mon Feb 23, 2009 7:16 pm
Location: Southwest BC, Canada
Contact:

Re: Dorber 10 foot 4 wgt rods

Post by skunkaroo » Tue Mar 10, 2009 2:44 pm

Thanks for doing the leg work, Ron.

Man that is cheap (even with the exchange). I don't think I can pass it up--provided I can slip it past the boss LOL!

Aaron
Aaron Laing, New Westminster BC
Moderator - FlyBC Flytying Forum
Stream Time Blog - Current Article: The Leggy Blond (Hawaiian bonefish pattern) (January 2011)
User avatar
RnF
Posts: 326
Joined: Sun Feb 22, 2009 9:06 pm
Location: Utah, USA
Contact:

Re: Dorber 10 foot 4 wgt rods

Post by RnF » Tue Mar 10, 2009 4:19 pm

Ohh :shock: That's a great deal. I am going to have to get one of these. Maybe their bass fly rod too.

What's the action on these rods?
Scott D
User avatar
Ron Eagle Elk
Posts: 2818
Joined: Sun Feb 22, 2009 12:33 am
Location: Carmel, Maine

Re: Dorber 10 foot 4 wgt rods

Post by Ron Eagle Elk » Tue Mar 10, 2009 4:49 pm

I'm not sure what the action is on the 10 foot rods. I'm hoping for a bit soft, but I'll see after I get it.
"A man may smile and bid you hale yet curse you to the devil, but when a good dog wags his tail he is always on the level"
User avatar
RnF
Posts: 326
Joined: Sun Feb 22, 2009 9:06 pm
Location: Utah, USA
Contact:

Re: Dorber 10 foot 4 wgt rods

Post by RnF » Tue Mar 10, 2009 4:58 pm

Ron Eagle Elk wrote:I'm not sure what the action is on the 10 foot rods. I'm hoping for a bit soft, but I'll see after I get it.
Maybe I will wait till you get yours. I am wanting it to be fairly soft as well. Let us know when you get it.
Scott D
User avatar
Ron Eagle Elk
Posts: 2818
Joined: Sun Feb 22, 2009 12:33 am
Location: Carmel, Maine

Re: Dorber 10 foot 4 wgt rods

Post by Ron Eagle Elk » Tue Mar 10, 2009 8:59 pm

Looks like it will take about 3 to 4 weeks to get it built and in my hands. will let you know how it casts.
"A man may smile and bid you hale yet curse you to the devil, but when a good dog wags his tail he is always on the level"
narcodog
Posts: 1224
Joined: Thu Feb 26, 2009 11:44 pm

Re: Dorber 10 foot 4 wgt rods

Post by narcodog » Tue Mar 10, 2009 9:54 pm

I just bough a Cortland 10 ft 4wt that came from GB. It is a med fast action and it does very well with a WF5 on it. It was $120.00. I bought it from an individual who brought it to this side of the pond. I did a search and found that they are not very expensive at all.
"I like beer, do you like beer, I like beer a lot."
User avatar
CM_Stewart
Posts: 257
Joined: Sat Feb 21, 2009 5:17 pm
Location: New York City
Contact:

Re: Dorber 10 foot 4 wgt rods

Post by CM_Stewart » Tue Mar 10, 2009 10:00 pm

Ron Eagle Elk wrote:Now to find some polypro mason's line.

REE
Good luck with that. All the mason's line I've been able to find is nylon. I did a fairly extensive search about a year and a half ago and came up with nothing on this side of the pond that is even close to the right diameter. I found two possible substitutes, either a Spectra arborist's throw line or a polypro thread that could be used to make a furled leader. I bought a spool of the polypro thread and it furls OK, but the the resulting leader is so light that the "wind resistance" makes it hard to cast. I decided I much preferred regular UNI-thread leaders treated with mucilin. If you want to try the polypro thread, I'd be happy to send you the spool (LOTS left). Perhaps a better alternative would be to just send a ten spot to one of our European members and have him send you a spool of the real stuff. Of course, Mike also suggested that a high pound test dacron line would work also. That you can find, and treated with mucilin it would float.
Bert
Posts: 9
Joined: Tue Feb 24, 2009 10:12 am
Location: Everett Washington USA

Re: Dorber 10 foot 4 wgt rods

Post by Bert » Wed Mar 11, 2009 10:39 am

I recently received a 100 m spool of 2.0 mm polypropylene braided cord in green. Here is where I ordered it.

http://www.TheEssentialsCompany.co.uk
Labels, Markers, Ties and Twines online The Essentials Company, Springfields, Station Road, Pulham St Mary, Diss, United Kingdom IP21 4QQ Tel +44 (0)1379 608899

On this page, scroll down to "Coloured Polypropylene Braided Cord"
http://www.theessentialscompany.co.uk/C ... ded%20Cord

With shipping from UK, the total value of my order was £15.40 which is about $US22.70 at current exchange rates.
daringduffer
Posts: 2195
Joined: Sun Feb 22, 2009 5:11 am

Re: Dorber 10 foot 4 wgt rods

Post by daringduffer » Wed Mar 11, 2009 11:10 am

Bert wrote:I recently received a 100 m spool of 2.0 mm polypropylene braided cord in green. Here is where I ordered it.

http://www.TheEssentialsCompany.co.uk
Labels, Markers, Ties and Twines online The Essentials Company, Springfields, Station Road, Pulham St Mary, Diss, United Kingdom IP21 4QQ Tel +44 (0)1379 608899

On this page, scroll down to "Coloured Polypropylene Braided Cord"
http://www.theessentialscompany.co.uk/C ... ded%20Cord

With shipping from UK, the total value of my order was £15.40 which is about $US22.70 at current exchange rates.
And...you have tried it? Using what rod and what casting stroke? On water, grass, snow..... indoors?
Come on, Bert - we are waiting here!!!!!!

(This was the only company I found, too. Or.... when I found it, I stopped looking. Found nothing here in Sweden (only 3mm red line for tents, and very pricey).

dd
Post Reply