Moderators: William Anderson, letumgo
-
Theroe
- Posts: 1465
- Joined: Sat Feb 25, 2017 11:42 pm
- Location: New York City
Post
by Theroe » Tue Apr 13, 2021 2:22 pm
This is one of my all-time early spring favorites when the fish are not looking up. Both the Beaverkill and Lackawaxen are loaded with rhyacophilla and hydropsyche larvae
..... The real trick is to get them down deep on the bottom where they live. I use two laps of sticky back lead tape on the shank, plus a dark tungsten bead for the head.
This group in the picture is tied with some special tungsten beads that are shaped like an insects head; they were sent to me by a friend and I figured to use them here.
Dana
-
Attachments
-
- Heavy rhyacophilla
- 734B78E4-098F-4D68-B107-33A9C41C2DF6.jpeg (361.01 KiB) Viewed 2342 times
Last edited by
Theroe on Tue Apr 13, 2021 4:44 pm, edited 1 time in total.
Soft and wet - the only way....
-
Theroe
- Posts: 1465
- Joined: Sat Feb 25, 2017 11:42 pm
- Location: New York City
Post
by Theroe » Tue Apr 13, 2021 2:25 pm
I had a couple of volunteers for the dinner table, here are the stomach contents:
-
Attachments
-
- 3C0BFEBC-A360-462F-8BFB-39260CD99B9B.jpeg (664.27 KiB) Viewed 2340 times
Soft and wet - the only way....
-
Theroe
- Posts: 1465
- Joined: Sat Feb 25, 2017 11:42 pm
- Location: New York City
Post
by Theroe » Tue Apr 13, 2021 4:58 pm
John
If you mean the strips of rubber, yes. A very long time ago, we used rubber bands wound around the hook shank, then colored with a permanent marker. This aforementioned pattern tied on the Mustad 37160, was big in Pennsylvania during the mid 1970’s......
Dana
-
letumgo
- Site Admin
- Posts: 13346
- Joined: Sat Feb 21, 2009 7:55 pm
- Location: Buffalo, New York
-
Contact:
Post
by letumgo » Tue Apr 13, 2021 8:50 pm
Really nice Dana! Is that your own custom dubbing blend? Love the flies.
-
Theroe
- Posts: 1465
- Joined: Sat Feb 25, 2017 11:42 pm
- Location: New York City
Post
by Theroe » Wed Apr 14, 2021 7:25 am
Ray
No - in the 1980s, I bought these pre-made dubbing brushes consisting of two thin strands of copper wire twisted with green dubbing. They were recently rediscovered while I was digging through of my bins of material. Next time I go into my apartment in the city I’ll take some pictures and post them!
Dana
Soft and wet - the only way....
-
letumgo
- Site Admin
- Posts: 13346
- Joined: Sat Feb 21, 2009 7:55 pm
- Location: Buffalo, New York
-
Contact:
Post
by letumgo » Wed Apr 14, 2021 11:24 am
Dubbing brushes are a great idea for a bottom bouncer pattern. The wire core adds a bit more weight to ensure the fly sinks quickly.
Gives me incentive to pull out the dubbing twister I made several years ago.
..... The real trick is to get them down deep on the bottom where they live. I use two laps of sticky back lead tape on the shank, plus a dark tungsten bead for the head.